江蘇保捷鍛壓有限公司
前身是上海保捷汽車零部件鍛壓有限公司（原上海汽車齒輪二廠），始建于1989年，是上汽集團齒輪總廠下屬的專業鍛造及車加工工藝的園區企業。
Shanghai Baojie Automobile Components parts Forging Co., Ltd before (Shanghai automobile gear NO.2 work) which is an enterprise in the park under Shanghai Automobile Group,specializing in forging machining.
江蘇保捷鍛壓有限公司于2011年新建，位于江蘇省太倉市瀏河鎮。
Jiangsu Baojie establish in 2011,located in Liuhe Town, Taicang,Jiangsu province.
公司目前擁有AMP30、AMP50各一臺，主要生產產品為AT行星輪、太陽輪及MT、DCT部分檔位齒。 Baojie have one APM30 APM50. The main products are AT planet gears, sun gears some shift gears in MT DCT.
公司目前擁有400T高能，630T高能，1000T高能及1600T高能多臺，并配置擴孔設備，主要生產MT檔位齒、AT齒圈擴孔、AT駐車輪、MT主減及螺傘齒。
Now we have several 400T,630T 1000T high-energy forging machines, configure the rolling equipments. The main products are MT shift gears, AT rolling sleeves, AT packing gears, MT driven gears spiral gears.
公司目前擁有橫軋機1臺，630T摩擦壓力機1臺及1000T摩擦壓力機1臺，1600T摩擦壓力機1臺，主要生產軸類零件。
We have a wedge rolling machine, a 630T, a 1000T a 1600T Friction Press, produce shafts.
研發中心概況:曾經是上海市市級鍛造研發中心,現申請江蘇省級研發中心。目前中心有研發人員42名，其中教授1名，高級工程3名，工程師8名, 采用 UG8.5 AUTOCAD DEFORM模擬等開發手段.
The introduction of R&D Center: We were own city level R&D Center fforgings in Shanghai before. Now we apply fthe Jiangsu provincial level R&D center. There are 42 research staff in center,1 professor,3 seniengineers, 8 engineer. Center adopt UG7.5, AUTOCAD, deform 3D etc. software.
